Support code 5800 is showing on Canon G4610

Short summary:

Turn off your Canon G4610 printer.
Press and hold the STOP button for 3 seconds.
While still holding the STOP button, press and hold the POWER button.
While holding the POWER button, press the STOP button five times consecutively.
Wait for the green light to stop blinking.
Turn on your printer and check if the error code has been reset.

Viktoriia Yushkevych

Hello, thank you for using Howly.
Could it be 5B00?

Customer Replay

Yes Having trouble with blocked blue ink-jet
Went to flush and struck problem??

Viktoriia Yushkevych

This error code means your printer's ink absorber pads have been saturated and need to be replaced.
However, you can try and reset the error, so you can use your printer for a little longer

Customer Replay

OK
How do I do that?

Top answer

Viktoriia Yushkevych

In order to reset the error, please carry out the following steps:

Turn off your printer
Press and hold the STOP button for 3 seconds
Press and hold the POWER button
While holding the POWER button, press the STOP button 5 times in a row
A green light should begin blinking, wait until it stops.

Customer Replay

Thank you Looks good

Viktoriia Yushkevych

You are welcome, ****!
It is still recommended that you take your printer to a repair shop to
replace the saturated absorber pads (or replace the pads yourself if you have the necessary technical skills)
Otherwise, the error may come back quite soon.

Customer Replay

OK Thanks

Get answers until you're satisfied

14 verified experts are online now

Expert's Assistant

Ask your question here

Share on:

Copy to clipbord

Was it helpful?

Howly expert is ready to help you with your Printers problem