Tablet 10.1 Onn won't turn on

What to do if the 10.1 Onn tablet won’t turn on

Updated: October 7, 2022

You may use your 10.1 Onn tablet to browse the web, check your mail, and perform basic computing tasks. This model has some problems, one of which is that the screen might freeze occasionally. Luckily, there are some efficient repair methods that you can try if your 10.1 Onn tablet won’t turn on.

Activate safe mode

Activate safe mode

If the 10.1 Onn tablet does not turn on, a third-party program may be the reason. The problem can be easily checked. Try turning on your tablet in Safe mode. In this case, third-party apps won’t be able to influence the operation of your device. 

To activate Safe mode, do the following:

  1. Press and hold the Power button for several seconds. 
  2. Do the same with the Power Off button.
  3. Then tap OK when you see the words “Reboot to safe mode”.

Then your 10.1 Onn tablet will reload, and the bottom left corner will display a notice that your device is in safe mode now

Ensure that the device, charger, and USB cable aren’t damaged

If the previous step did not work, check the charger and cable.

Indeed, with time, any connection cord can damage and lose capacity. If you see that the cord is damaged, replace it with a new one.

The charging port is another frequent culprit. To begin with, examine whether there is any dust or debris in the harbor. Charging issues might be caused by anything as simple as a dirty port. You might try using a brush or compressors to clear it.

Force a shutdown of your Tablet 10.1

If the above solutions haven’t worked, take out the battery and start pushing the power button for a short period of time.

This uses up all of the battery’s Power. Then place the battery in, hold the power button for a few seconds, and wait for the device to react.

To start the gadget, hold down the power button for a short period of time. In case the Onn tablet doesn’t turn on even after that, try pushing on the volume and power buttons simultaneously for 2 seconds after turning off the device’s Power. This will give you other boot options.

Use a computer to troubleshoot your tablet

Use your computer to troubleshoot your tablet

Check if your computer detects the tablet by connecting it through the cord. If it does, it’s unlikely that the gadget is dead. In this case, try some of these methods:

  • Take the cord out of the power adapter.
  • Verify that your computer is powered on and plugged into an electrical outlet.
  • Utilize the USB cord with your tablet to attach it to the USB port on your computer.
  • Wait for ten to fifteen minutes.
  • Within 10 seconds, unplug and re-plug the cord from your tablet.

Unfortunately, your 10.1 Onn tablet won’t turn on if these simple methods fail. Take it to an Android repair center or return it to the store if it still boldly refuses to switch on.

Trusted & Secured