Samsung washer 4e code

Samsung washer error code 4e marks the water supply difficulties. For instance, if the water ceases to go in the washer tub within six minutes after the cycle begins, you will see this code on the screen.

Troubleshooting is simple but requires many tests, as the water supply concerns numerous conjunctions to check. We gathered the experience of the best Howly technicians to write this article. It will likely help to cope with the issue. In any case, chat with profs 24/7. Let’s begin the story.

Fix 4e error code Samsung washer

The first thing you need to do is to ensure the water supply valve is wide open, as well as the input valve for your apartment or house. If the valves are open and not clogged, and the leakage does not occur, let’s proceed.

Reset the washer

Turn off your washer completely and unplug it. Wait a pair of minutes and try switching it on again. It will start from the cycle it stopped, so you will not need to alter the program. Resetting helps with electronic failures. If it’s not your case, proceed with the manual check of why the Samsung washing machine error 4e code occurs.

Check the water supply

Ensure that the 4e code on Samsung washer results not from the poor connections to the water supply. Follow this algorithm for this purpose:

1. Check that the pipes underneath the washer are not bent or cracked.
2. Tighten the connectors of the water pipes to the washing machine and the pipe connections to the faucets.

Sometimes the water flow is not enough to fill the washer tank in six minutes, so wait until the supply is enough.

Look at the water entry points

Both the hot and cold water entry points must be operative. If you have only one type of water supply, for example, hot or cold water, try a splitter for both water entry points.

It’s an obligatory step to eliminate the code 4e on Samsung washer. So if you don’t have a splitter but have only hot or cold water, it is the root of the problem. Alternatively, if it’s not the first usage of the washer, the issue might be elsewhere.

Unblock the water hoses if necessary

Clogged water hoses prevent water from entering the washer. When it happens, the Samsung 4e code is displayed. Do the following:

1. Turn off the water valve.
2. Disconnect the hose from both ends to remove it.
3. Pour water through it to see if it passes through the hose without being obstructed.
4. Unclog the hose with a piece of wire, if any.
5. Reattach the hose and restart the washer cycle after it has been unblocked.

This might help to clean the hoses and restore the water inlet.

Inspect the water supply valves

These valves act as sealers to stop the water input when the washer is full. Do as follows to check if they are the reason for displaying Samsung washer code 4e:

1. Unplug the device. Look at the valves.
2. They must be wide open in the position parallel to the pipes. If not parallel, turn them clockwise.
3. Alternatively, you might need to replace them. Check if they are functioning.
4. Restart your Samsung washing machine to determine if the error number has been removed. Otherwise, proceed to the final step.

Unblock the water inlets and drains

To ensure the Samsung washer 4e error code is not connected with water inlets, check them with these:

1. Disconnect the hoses from the inlets.
2. Examine the water inlets with a flashlight for blockages.
3. Clean mesh filters in the hoses with water.

Check the performance of the device.